intermoda Orbit Motor refers to a small, low-speed, high-torque hydraulic motor with an internal meshing gear, which has many advantages such as simple structure, good low-speed performance, and strong short-term overload capability. Orbit motors are now widely used in daily production in various industries, such as injection molding machines, tool machinery, construction machinery, and fishing industries.
1. Q: What are the specifications of intermoda Orbit Motor?
A: IAOM3 (160/200/250/305/395), IAOM5 (200/250/305/395).
2. Q: Where is the origin of intermoda Orbit Motor?
A: intermoda is a self-made brand by King Newton, and the Orbit Motor is produced by OEM.
3. Q: What is the difference between intermoda Orbit Motor IAOM3 and IAOM5?
A: Distinguished by the appearance of the shell, and the required flow rate is different.
4. Q: Is the intermoda Orbit Motor equivalent to which series of DANFOSS?
A: IAOM3 is equivalent to DANFOSS(OMP), and IAOM5 is equivalent to DANFOSS(OMS).
5. Q: Is the size of the shaft mounting surface compatible with other brands?
A: For common brands on the market (such as: DANFOSS, ETON), the compatibility is extremely high and can be directly replaced.
6. Q: What is the maximum speed and torque of each specification?
A: You can refer to the catalog, each specification has the highest speed and torque.
7. Q: I originally used another brand of orbit motor, if I want to find a replacement, can I get a recommendation?
A: Please provide the model of other brand and the technical team will recommend the corresponding model directly.
8. Q: How long will it last under normal use?
A: At least five years.
9. Q: How long is the delivery time?
A: intermoda Orbit Motors are fully stocked. If there is any out of stock, the lead time is about three weeks.
1. Q: What should I pay attention to before installing the orbit motor?
A: The output shaft of the motor should be coaxial with the center line of the connected coupling.
2. Q: Do I need to fill oil before use?
A: Before first starting, the orbit motor must be completely filled with oil to prevent damage.
3. Q: Any particular requirement of the position of the drain hole?
A: The oil drain hole is directly connected to the oil tank and must be located at the highest level of the motor to ensure that the motor is always filled with oil.
4. Q: There is an abnormal noise when the motor is running. What would be wrong?
A: There are many possible cases of abnormal sound. Please contact the customer service. The technical team will assist to determine and inform the follow-up processing method.
5. Q: What is the limit of fuel return resistance when the orbit motor is running?
A: The fuel return resistance of the orbit motor should be less than 0.3MPa.
6. Q: Are there any restrictions on the choice of hydraulic oil?
A: We recommend using hydraulic oil with anti-wear additives and a minimum viscosity of 95. Once it reaches normal working pressure, the viscosity of the oil must be at least 12 cSt, preferably in the range of 20 to 60. Denison MF-O, Vickers M-2952-SI-286S performance requirements and DIN 51524 specifications are to be reached as much as possible.
7. Q: What should I do if there is oil leakage when the orbit motor is running?
A: You can take pictures and report the oil spill at first, and the technical team will assist to determine the cause and inform the follow-up procedure which will help to resolve the problem the best.
8. Q: Does the orbit motor need warm-up?
A: Yes, when the cold engine is started, avoid high-speed operation until the entire system heats up to provide sufficient lubrication.
1. Q: If it is damaged, are there spare parts that can be replaced?
A: We provide various specifications of spare parts for replacement.
2. Q: How long is the warranty period?
A: The price includes a one-year warranty. If you need a two-year or three-year warranty, you can purchase it at an additional cost.
3. Q: During the warranty, do I need to pay the freight when I send it back?
A: Depending on the shipping location, if the shipping location is in Taiwan, even if the product has been exported abroad, we will only bear the shipping cost within the island of Taiwan. If the delivery location is abroad, we will only responsible for the round-trip freight in between.
4. Q: After purchasing, it is found that the torque and speed do not match, can I change to another model?
A: If you have not used it, you can send it back for replacement, however you would have to pay the round-trip freight yourself. If it has been used, it will not be able to get replaced unfortunately.
5. Q: After installation, the position of the oil inlet hole cannot be adjusted due to the design of the oil circuit, can the direction of shaft rotation be changed?
A:You can refer to the instructional video and follow the steps to change the direction of the shaft rotation.
6. Q: After the warranty expires, how is the maintenance fee calculated?
A: You can inform the technicial team of the damage condition. The maintenance fee is charged according to the required spare parts and working hours.
7. Q: Can I purchase spare parts and replace them by myself?
A: Yes.
8. Q: Can you send someone to the factory to help repair the orbit motor?
A: You can first contact our customer service staff to determine the severity of the problem, and then discuss whether to go to the factory for replacement and repair.
9. Q: How do I know if the purchased product is still within the warranty period?
A: Please log in to the website to check order information, you can find every order with every product's details, amount and warranty time.
10. Q: What industries can orbit motors be applied to?
A: Plastic injection machine, fishing machinery industry, construction machinery industry.
